If this happens in a koi pond, the result could be the chlorine or chloramine poisoning of the fish. The AquaFill electronic water level controller is designed to fail in the open position, meaning that the 24-volt circuit to the solenoid is interrupted causing the solenoid that supplies the water to become non-operational. It is truly a "Fail-Safe" system, so consequently, the AquaFill is used by koi farms and breeders worldwide. The AquaFill's only competition is the auto fill, which uses probes to sense the water level through conductivity.It requires an elaborate, electronic circuit board to accomplish this. Because of the many electrical component parts, there are many things that can go wrong with it and does. As a result, pool contractors are switching to AquaFill, not just for the economics, but for its reliability and dependability in doing what it is designed to do. The AquaFill only has one moving part and that is a small styrene float bobber that rides up and down on a hermetically sealed shaft containing a micro leaf switch. The float acts as a switch between the 24-volt transformer and the inline solenoid switch. When the float bobber drops due to water loss through splashing and evaporation, two magnets embedded into the float cause the micro switch to close and completes the circuit, sending voltage to the solenoid and causing it to open and put water into the pond. This would create undue wear and tear on both the switch and the solenoid. The item "Electronic Float Valve, Auto Fill, Pond, Pool, Fountain, Water Feature MadeInUSA" is in sale since Monday, January 18, 2016. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Ponds & Water Features\Pond Liners". The seller is "aquamediacorp" and is located in Escondido, California.
This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, South africa, New Zealand, Egypt, Reunion.