Usually completed in 1 hour or less. Control Mounting: The control timer is normally mounted on a 4 X 6 treated post tipically mounted 2' above the ground and 6' to 8' from the water's edge. We furnish as a standard 12' of PVC flex conduit over the 1st twelve feet of submersible cable.This is usually buried between the control and the water's edge to protect the cable from mowers and weed eaters. Anchoring can be achieved by using either concrete blocks out in the lake or shore anchoring with metal stakes or rebar driven down at an angle at the water's edge. You can see all of our products on our Turtle Fountains website. Our fountains are custom built to order. We have many different options. Fountains and Liberators are available in 7 different HP sizes: 1/2HP, 3/4HP, 1HP, 1 1/2HP, 2HP, 3HP and 5HP. Turtle Fountains manufacturers pumps for specific applications to achieve the maximum flow rate, GPM (gallons per minute). The flow rates, height and width shown for all of our products are conservative minimums. We do not distort or exagerate our photographs. We do not use off the shelf sump pumps. Turtle Fountain has been manufacturing beautiful floating fountains and aerators for lakes and large ponds since 1994. We have built our business by providing quality products and taking care of our customers. The item "1 1/2HP Turtle Fountain Justice Floating Lake and Pond Aerator withLights (USA)" is in sale since Wednesday, August 7, 2013. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Ponds & Water Features\Outdoor Fountains". The seller is "tom2065" and is located in Gallaway, Tennessee.
This item can be shipped to United States.